Hi,
Was wondering from last version , serial link still not working with IOL ? it is working on unetlab , any clue or work around to fix this issue ?
Thank you in advance and again nice work keeps getting better and better
Serials connections
Moderator: mike
-
- Posts: 533
- Joined: Wed Mar 15, 2017 1:54 pm
Re: Serials connections
Router#sh cdp nei
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,
D - Remote, C - CVTA, M - Two-port Mac Relay
Device ID Local Intrfce Holdtme Capability Platform Port ID
Router Ser 1/0 161 R B Linux Uni Ser 1/0
Total cdp entries displayed : 1
No problems here
Cisco IOS Software, Linux Software (I86BI_LINUX-ADVENTERPRISEK9-M), Version 15.5(2)T, DEVELOPMENT TEST SOFTWARE
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,
D - Remote, C - CVTA, M - Two-port Mac Relay
Device ID Local Intrfce Holdtme Capability Platform Port ID
Router Ser 1/0 161 R B Linux Uni Ser 1/0
Total cdp entries displayed : 1
No problems here
Cisco IOS Software, Linux Software (I86BI_LINUX-ADVENTERPRISEK9-M), Version 15.5(2)T, DEVELOPMENT TEST SOFTWARE
-
- Posts: 14
- Joined: Sun Mar 19, 2017 10:04 pm
Re: Serials connections
Thank you , will try the same exact image.
-
- Posts: 14
- Joined: Sun Mar 19, 2017 10:04 pm
Re: Serials connections
Hi,
still no go ? am i the only one ? under unetlab i don't have this problem ? when i remove the serial link connections i can start my IOU .
Will install a new vm with unetlab to see if it is something odd or a bug.
still no go ? am i the only one ? under unetlab i don't have this problem ? when i remove the serial link connections i can start my IOU .
Will install a new vm with unetlab to see if it is something odd or a bug.
-
- Posts: 14
- Joined: Sun Mar 19, 2017 10:04 pm
Re: Serials connections
Following up , after installing a new Install of EVE-NG the problem is gone , i have both running trying to see through the log and cant find the problem. But at least with the new install it is working .
So if anyone get this problem you know what to do
Have a great day.
Thank you again TEAM EVE-NG
Patrick D
So if anyone get this problem you know what to do
Have a great day.
Thank you again TEAM EVE-NG
Patrick D
-
- Posts: 5080
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Serials connections
I will ban you from our Forum, if you will continue add hidden advertisements in your posts. !
Add on topology bridge network and connect it to same node.
Add on topology bridge network and connect it to same node.
You do not have the required permissions to view the files attached to this post.