Serials connections

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
patrickdenis
Posts: 14
Joined: Sun Mar 19, 2017 10:04 pm

Serials connections

Post by patrickdenis » Mon Mar 20, 2017 1:42 am

Hi,

Was wondering from last version , serial link still not working with IOL ? it is working on unetlab , any clue or work around to fix this issue :) ?

Thank you in advance and again nice work :) keeps getting better and better :)

ecze
Posts: 533
Joined: Wed Mar 15, 2017 1:54 pm

Re: Serials connections

Post by ecze » Mon Mar 20, 2017 1:54 am

Router#sh cdp nei
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,
D - Remote, C - CVTA, M - Two-port Mac Relay

Device ID Local Intrfce Holdtme Capability Platform Port ID
Router Ser 1/0 161 R B Linux Uni Ser 1/0

Total cdp entries displayed : 1

No problems here
Cisco IOS Software, Linux Software (I86BI_LINUX-ADVENTERPRISEK9-M), Version 15.5(2)T, DEVELOPMENT TEST SOFTWARE

patrickdenis
Posts: 14
Joined: Sun Mar 19, 2017 10:04 pm

Re: Serials connections

Post by patrickdenis » Wed Mar 22, 2017 12:48 am

Thank you , will try the same exact image.

patrickdenis
Posts: 14
Joined: Sun Mar 19, 2017 10:04 pm

Re: Serials connections

Post by patrickdenis » Wed Mar 22, 2017 12:53 am

Hi,

still no go ? am i the only one ? under unetlab i don't have this problem ? when i remove the serial link connections i can start my IOU .

Will install a new vm with unetlab to see if it is something odd or a bug.

patrickdenis
Posts: 14
Joined: Sun Mar 19, 2017 10:04 pm

Re: Serials connections

Post by patrickdenis » Wed Mar 22, 2017 1:40 am

Following up , after installing a new Install of EVE-NG the problem is gone , i have both running trying to see through the log and cant find the problem. But at least with the new install it is working .
So if anyone get this problem :) you know what to do :)

Have a great day.

Thank you again TEAM EVE-NG

Patrick D

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Serials connections

Post by Uldis (UD) » Wed Jun 26, 2019 6:32 am

I will ban you from our Forum, if you will continue add hidden advertisements in your posts. !

Add on topology bridge network and connect it to same node.
You do not have the required permissions to view the files attached to this post.

Post Reply