Hello, I have an issue with my EVE install from the official EVE ISO.
When I ssh into the server, I type some commands for example ip addr, top, cat /proc/cpuinfo my ssh just freeze
I tried to reboot the server but I have never seen something like that before.
Also the after loggin into the web interface, I am stuck with a blank page : my_eve_ip/legacy/
Serveur details :
HP ProLiant DL360 G6
2x Intel(R) Xeon(R) CPU E5504
4x 16Go DDR3
500Go HDD
Ubuntu 16.04.12
kernel : Linux eve-ng 4.4.14-eve-ng-ukms+
EVE-NG 2.0.3-70
I followed the guide how to properly report a helpdesk issue and I did not solve the problem. If someone have any idea about this issue?
Cheers
[FIXED] EVE server access through SSH freezing
Moderator: mike
-
- Posts: 15
- Joined: Mon Nov 20, 2017 9:03 am
[FIXED] EVE server access through SSH freezing
Last edited by anon123 on Mon Nov 27, 2017 10:39 am, edited 2 times in total.
-
- Posts: 409
- Joined: Sun Mar 19, 2017 10:27 pm
Re: EVE server access through SSH freezing
v86 is the latest one and fixed all the issue.anon123 wrote: ↑Mon Nov 20, 2017 1:18 pmHello, I have an issue with my EVE install from the official EVE ISO.
When I ssh into the server, I type some commands for example ip addr, top, cat /proc/cpuinfo my ssh just freeze
I tried to reboot the server but I have never seen something like that before.
Also the after loggin into the web interface, I am stuck with a blank page : my_eve_ip/legacy/
Serveur details :
HP ProLiant DL360 G6
2x Intel(R) Xeon(R) CPU E5504
4x 16Go DDR3
500Go HDD
Ubuntu 16.04.12
kernel : Linux eve-ng 4.4.14-eve-ng-ukms+
EVE-NG 2.0.3-70
I followed the guide how to properly report a helpdesk issue and I did not solve the problem. If someone have any idea about this issue?
Cheers
Try new version let us know.
R!
-
- Posts: 15
- Joined: Mon Nov 20, 2017 9:03 am
Re: EVE server access through SSH freezing
It was an hardware issue with the cisco switch 2960, thanks for your help. My topic is resolved
-
- Posts: 1
- Joined: Sat May 04, 2019 7:48 pm
Unable to access SSH sessions of the nodes inside the GUI of EVE when connected to GUI using NAT
Hello Team,
I'm just testing EVE on Internet using the community version before migrating to professional.
Currently I am unable to access SSH sessions of the nodes inside the GUI of EVE when connected to GUI itself using NAT (external port 12451 and mapped port is 80).
Is there anything that I am missing? Or is this not supported in Community version?
Appreciate your response.
Thanks,
Vishu
I'm just testing EVE on Internet using the community version before migrating to professional.
Currently I am unable to access SSH sessions of the nodes inside the GUI of EVE when connected to GUI itself using NAT (external port 12451 and mapped port is 80).
Is there anything that I am missing? Or is this not supported in Community version?
Appreciate your response.
Thanks,
Vishu