Page 1 of 1

Unable to run Juniper vSRx > JUNOS 17.3R2.10

Posted: Mon May 13, 2019 2:05 pm
by gnek
Hi all,


following "HowTo's" procedure I'm able to start vSRX till Rel JUNOS 17.3R2.10. (https://www.eve-ng.net/documentation/ho ... -and-later)

EVE-NG version: 2.0.3-95
QEMU version: 2.4.0

I've tried manyversions greater than 17.3R2.10.and the startup always fail as reported below:

May 13 14:02:09 jlaunchd: logical-system-service (PID 14015) started


FreeBSD/amd64 (Amnesiac) (ttyu0)

login: root
NMI/cpu0 ... going to debugger
###Not a panic, mastership retained
[ thread pid 14045 tid 100276 ]
Stopped at 0xc84b3fcf: movl 0x1c(%rbp),%ebx
db>



Thanks in advance

Re: Unable to run Juniper vSRx > JUNOS 17.3R2.10

Posted: Mon May 13, 2019 3:33 pm
by Uldis (UD)
dear friend, vSRX require top level CPU E5-26XXv3 or v4 to run
On PC i7 it even doesnt work..
All complaints to Juniper...

Re: Unable to run Juniper vSRx > JUNOS 17.3R2.10

Posted: Tue May 14, 2019 7:22 am
by gnek
thanks for the feedback.

The server hosting EVE is an opta core with Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz, it should support vSRX images.

Can I change any parameters on EVE or on image script launcher to guarantee the needed resource to run vSRX rel 19.1 R1.6 ?

Thanks in advance

Re: Unable to run Juniper vSRx > JUNOS 17.3R2.10

Posted: Tue May 14, 2019 10:45 am
by Uldis (UD)
Version vSRX 19.1R1.6 works just nice !
BUT ON EVE Bare !!!
Not esxi EVE

Just a bit needs to change on template when you add the node, vSRX-NG !
1. Use qemu 2.12 or 3.1, 3.1 is better and faster.

2, and in qemu line at the end add "-cpu host"
-machine type=pc-1.0,accel=kvm -cpu qemu64,+ssse3,+sse4.1,+sse4.2,+x2apic,+aes,pclmulqdq -serial mon:stdio -nographic -nodefconfig -nodefaults -rtc base=utc -cpu host

Uldis

Re: Unable to run Juniper vSRx > JUNOS 17.3R2.10

Posted: Sat May 18, 2019 7:19 pm
by NETPRAK2012
Hi UD,

Please can you let me know Qemu 3.1 version added in Eve-community version or not.

Re: Unable to run Juniper vSRx > JUNOS 17.3R2.10

Posted: Sun May 19, 2019 7:14 am
by Uldis (UD)
no, Qemu 3.1 is not in the Community.
But you can use 2.12

And remember only BARE EVE runs vSRX 19.1

ESXI or VM ware workstation versions, simply does not

Re: Unable to run Juniper vSRx > JUNOS 17.3R2.10

Posted: Thu May 30, 2019 1:32 pm
by janostasik
Uldis,
I did fresh install of eve-ng pro in VM. I see qemu version 2.5 when issue qemu-system-x86_64 --version. Does it mean that we need to install version 3.1? Or how can i check if its included?

Thanks.

Jan

Re: Unable to run Juniper vSRx > JUNOS 17.3R2.10

Posted: Tue Jun 04, 2019 8:17 pm
by Uldis (UD)
Did you read my post

vSRX is ok on Bare ONLY !!!

NOT VM