Nexus9K and static route problems

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
lanab
Posts: 3
Joined: Wed Jan 10, 2018 11:46 am

Nexus9K and static route problems

Post by lanab » Sat Apr 25, 2020 6:38 pm

I have some problems, the static routes does not get populated, is there a bug in the n9k image, ospf and other dynamic routing protocols work, just not static?

Version : nxos.9.2.2.bin


switch# sh ip static-route vrf default

Static-route for VRF "default"(1)
IPv4 Unicast Static Routes:
0.0.0.0/0, configured nh: 192.168.10.80/32
(not installed in urib)
rnh(installed in urib)
10.46.10.0/23, configured nh: 192.168.11.132/32
(not installed in urib)
rnh(installed in urib)


switch# sh ip route
IP Route Table for VRF "default"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
'%<string>' in via output denotes VRF <string>

lanab
Posts: 3
Joined: Wed Jan 10, 2018 11:46 am

Re: Nexus9K and static route problems

Post by lanab » Sun Apr 26, 2020 8:02 am

Problem is that LACP on the port-channel seems buggy when connected to a ASA so the routes comes and goes.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Nexus9K and static route problems

Post by Uldis (UD) » Sun Apr 26, 2020 8:49 am

What ASA is used??

Post Reply