nxosv-final.7.0.3.I7.4.qcow2 return to loader

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
gurrav
Posts: 2
Joined: Wed Jan 15, 2020 12:57 pm

nxosv-final.7.0.3.I7.4.qcow2 return to loader

Post by gurrav » Wed Apr 29, 2020 5:31 pm

Hi everyone
I'm testing nxosv-final.7.0.3.I7.4.qcow2, but it always return to loader prompt. Only one time work fine.
please help me.

Sysconf checksum failed -1, Using default values
WARNING: No BIOS Info found
Sysconf checksum failed -1, Using default values
serial --speed=115200 --word=8 --stop=1 --parity=no

success
Sysconf checksum failed -1, Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed. Trying to read config file from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed.



Loader Version 5.01.0
Entering interactive mode

loader >

Post Reply