nxosv-final.7.0.3.I7.4.qcow2 return to loader
Posted: Wed Apr 29, 2020 5:31 pm
Hi everyone
I'm testing nxosv-final.7.0.3.I7.4.qcow2, but it always return to loader prompt. Only one time work fine.
please help me.
Sysconf checksum failed -1, Using default values
WARNING: No BIOS Info found
Sysconf checksum failed -1, Using default values
serial --speed=115200 --word=8 --stop=1 --parity=no
success
Sysconf checksum failed -1, Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed. Trying to read config file from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed.
Loader Version 5.01.0
Entering interactive mode
loader >
I'm testing nxosv-final.7.0.3.I7.4.qcow2, but it always return to loader prompt. Only one time work fine.
please help me.
Sysconf checksum failed -1, Using default values
WARNING: No BIOS Info found
Sysconf checksum failed -1, Using default values
serial --speed=115200 --word=8 --stop=1 --parity=no
success
Sysconf checksum failed -1, Using default values
Strlen bootflash: is 10
Device bootflash: is Drive 0x80 Partition 3
ATE0Q1&D2&C1S0=1
Trying to read config file /boot/grub/menu.lst.local from (hd0,4)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed. Trying to read config file from (hd0,5)
Filesystem type is ext2fs, partition type 0x83
Number of devices detected by BIOS is 1
Failed.
Loader Version 5.01.0
Entering interactive mode
loader >