Support and News Forum

Hello.

Today I've installed Eve-ng. After that I added an Cisco IOS image, but when I tried to calculate the IDLE-PC, the Ctrl+] and the i combination does not work. I've tried all the possible combinations, but it simply does not work (I'm following this tutorial --> http://www.eve-ng.net/documentation/how ... -cisco-ios)
Is there another way to calculate the IDLE PC value?

Regards.

it does work, just use classic terminals like Putty, and make sure you are using US keyboard..
Uldis

Hello Uldis.
I was able to make it work by using the Hyper-V terminal and then follow the US layout.
Best regards and thank you for your answer.

I'll give that American style keyboard ago.

With the following combination;

CTRL + ] i (3 keys only not plus sign)

All in one go..


If that works, it'll explain why I wasn't getting any joy on that level..

US keyboard:

ctrl +]

then

i

it works, at least on Putty or CRT telnet software

ULDIS you da mannnnnnnnn!!!



Thank you