Hi,
I noticed that configuration on topologies are kept somehow temporarily.
Let's say I created DMVPN. I save the config through "(do) write memory" command and it's fine.
I turn the devices off and turn them on to check if it loads the configuration that I saved and it works as expected
but...
after a few days I want to continue on a particular topology configuration and I can't because it loads a new configuration.
I've EVE-NG locally and shut a VM down when it's not necessary to run it anymore.
I dunno why it's happening.
If you've any ideas share it please.
EVE version: a newest one (2.0.3-95)
VMware Workstation 15 for virtualization
Thanks.
Why saved configurations get lost after a while?
Moderator: mike
-
- Posts: 18
- Joined: Tue Mar 05, 2019 4:42 pm
-
- Posts: 5068
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Why saved configurations get lost after a while?
If you did WR
then nothing will be lost...
But loading other config, means you had badly images which are committed with some cfg to be as default.
Usually such behaviour happens when you grab image from unknown source .. Sorry
Another option is:
https://www.eve-ng.net/documentation/ho ... figuations
Uldis
then nothing will be lost...
But loading other config, means you had badly images which are committed with some cfg to be as default.
Usually such behaviour happens when you grab image from unknown source .. Sorry
Another option is:
https://www.eve-ng.net/documentation/ho ... figuations
Uldis