Support and News Forum

Posted: **Mon May 06, 2019 1:48 pm**

Hi,

Please help me.

I followed the suggestions for adding Windows Client but still don't work:

1. image is wrongly prepared, looking at your screenshot it is windown host.
Well this node need install first following our how to:
https://www.eve-ng.net/documentation/ho ... on-the-eve
I made even video how make this host for EVE.

2, simple fix permissions is missed. as well given in same how to.
/opt/unetlab/wrappers/unl_wrapper -a fixpermissions

3. try wipe node first, wipe cleans previous saved node kvm hdd from tmp directory and then node starts from scratch. It could be your case, if you saying that you had used it before.

4. simply hdd is overloaded, check your hdd for eve, cli command: df -h

Most common fault is wrongly prepared image..
Uldis

Screenshot 2019-05-06 at 15.31.00.png

Screenshot 2019-05-06 at 15.25.39.png

Screenshot 2019-05-06 at 15.21.19.png

Posted: **Mon May 06, 2019 4:12 pm**

I'm thinking that during the virtual hdd creation something went wrong because the size doesn't match...

Windows7 iso is 3.32 GB but virtioa.qcow2 is about 197MB

How I can make the right image?

Or maybe is something concerned the directory creation.
is there some rule about the directory creation to follow?

Posted: **Mon May 06, 2019 4:54 pm**

OK now I figured out what was the issue.

for Windows Hosts you have to use "win-" for windows server you have to use "winserver-" so the directory name has to match some rule.

by the way, I think I will back soon with some other issue.

Posted: **Tue May 07, 2019 3:39 am**

It is because you do not read how to.

Support and News Forum

Adding Windows NODE still gray

Adding Windows NODE still gray

Re: Adding Windows NODE still gray

Re: Adding Windows NODE still gray

Re: Adding Windows NODE still gray