Hi,
I'm adding the IOL for EVE but can't start it via web GUI. I have tested using the CLI, and it works fine for the console. I also tried the command sending from the web GUI to the back end by checking the process.
this is the command that I found the web GUI is using "/opt/unetlab/wrappers/iol_wrapper -T 0 -D 1 -t R1 -F /opt/unetlab/addons/iol/bin/i86bi_linux-adventerprisek9-ms.155-2.T.bin -d 0 -e 1 &"
I tried it in the linux, and it also works fine. for some reason, I just couldn't start it from the WEB. is there any log that I can see other than "R1 failed" on web GUI?
Can't start the IOL image on the web
Moderator: mike
-
- Posts: 41
- Joined: Tue Apr 04, 2017 7:36 am
Re: Can't start the IOL image on the web
https://nbctcp.wordpress.com/2015/07/02 ... n-on-esxi/
I encounter same issue with latest EVE-NG
SOLUTION:
# cd /opt/unetlab/addons/iol/bin
the name must be iourc not .iourc here
I encounter same issue with latest EVE-NG
SOLUTION:
# cd /opt/unetlab/addons/iol/bin
the name must be iourc not .iourc here