Page 1 of 1

IOS-XE version 16.6.x

Posted: Fri Nov 02, 2018 3:06 pm
by tcpip
Hi all,

How can I get or upgrade the actual ios-xe version 15.5.x to the 16.6.x?

Thanks all.

Re: IOS-XE version 16.6.x

Posted: Sat Nov 03, 2018 8:01 am
by Uldis (UD)
cisco.com
download ISO install media from CSRv1000 and create image following here:
http://www.eve-ng.net/documentation/how ... li-routers

https://software.cisco.com/download/hom ... uji-16.8.2

Uldis

Re: IOS-XE version 16.6.x

Posted: Fri Jan 04, 2019 7:18 pm
by tcpip
I get stuck in this part

*Jan 4 19:55:23.181: %IOSXE_OIR-6-INSCARD: Card (rp) inserted in slot R1
*Jan 4 19:55:23.181: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Jan 4 19:55:23.181: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Jan 4 19:55:23.799: %SYS-5-RESTART: System restarted --
Cisco IOS Software [Fuji], Virtual XE Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 16.9.2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 05-Nov-18 19:26 by mcpre
*Jan 4 19:55:24.027: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Jan 4 19:55:24.027: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Jan 4 19:55:26.089: %AN-6-AN_ABORTED_BY_MANUAL_CONFIG_DETECTED: Autonomic disabled due to detection of new configuration.
*Jan 4 19:55:26.089: %AN-6-AN_ABORTED_BY_CONSOLE_INPUT: Autonomic disabled due to User intervention on console. configure 'autonomic' to enable it.
*Jan 4 19:55:26.132: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default
*Jan 4 19:55:39.571: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained