Show running-config showed less info

Moderator: mike

Post Reply
netwobiz
Posts: 2
Joined: Mon Jan 28, 2019 1:17 am

Show running-config showed less info

Post by netwobiz » Mon Jan 28, 2019 1:39 am

Hi, there
I am a newbie for EVE-NG. While I did a show running-config for the Cisco IOL from the CLI, it showed less data than in all the Cisco IOL devices. Below is the screen shot for the show run. There are no context such as all the interfaces. Appreciated if anyone can shed some light on that.


==========================================================
R9#sh run
Building configuration...

Current configuration : 1088 bytes
!
! Last configuration change at 01:58:47 CET Mon Jan 28 2019
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname R9
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone CET 1 0
no ipv6 cef
ipv6 multicast rpf use-bgp
!

R9#

Uldis (UD)
Posts: 5068
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Show running-config showed less info

Post by Uldis (UD) » Mon Jan 28, 2019 8:24 am

it is your putty or CRT default settings issu.
Reset telnet terminal settings

netwobiz
Posts: 2
Joined: Mon Jan 28, 2019 1:17 am

Re: Show running-config showed less info

Post by netwobiz » Mon Jan 28, 2019 10:56 pm

It works. Problem solved. Thank you!

The previous telnet came from Win10 default Telnet client (it popped up after double click on devices). I used Xshell6 and it worked like a charm.

I am still wondering what is the cause of it? Any idea is welcomed.

Post Reply