I am wondering if anyone has found a Cisco L2 image that works as a fully functioning switch? I found one IOL image for L2, but it doesn't even support SDM, so it seems very very basic.
Wondering if this can be done at all as switches perform a lot of hardware switching, I see vIOS L2 in the EVE-NG node menu, but Cisco doesn't exactly have that listed in their software downloads.
Any input appreciated!
Any Cisco Layer 2 image work for EVE-NG as a proper switch?
Moderator: mike
-
ande0255
- Posts: 4
- Joined: Sat Nov 16, 2019 10:16 am
-
Uldis (UD)
- Posts: 5190
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Any Cisco Layer 2 image work for EVE-NG as a proper switch?
All virtual switch image from cisco are two ways:
IOL L2/L3 switch
and vIOS L2/L3 from VIRL
Both images are not listed and will not be in the official IOS share place.
I recommend to check this as well video...
https://www.eve-ng.net/index.php/docume ... from-virl/
Uldis
IOL L2/L3 switch
and vIOS L2/L3 from VIRL
Both images are not listed and will not be in the official IOS share place.
I recommend to check this as well video...
https://www.eve-ng.net/index.php/docume ... from-virl/
Uldis
-
ande0255
- Posts: 4
- Joined: Sat Nov 16, 2019 10:16 am
Re: Any Cisco Layer 2 image work for EVE-NG as a proper switch?
Awesome I will check that out, thank you!