Calculating IDLE-PC - Key combination does not work

Before posting something, READ the changelog, WATCH the videos, howto and provide following:
Your install is: Bare metal, ESXi, what CPU model, RAM, HD, what EVE version you have, output of the uname -a and any other info that might help us faster.

Moderator: mike

Post Reply
Tiashsam
Posts: 4
Joined: Mon Sep 03, 2018 3:16 pm

Calculating IDLE-PC - Key combination does not work

Post by Tiashsam » Mon Sep 03, 2018 3:22 pm

Hello.

Today I've installed Eve-ng. After that I added an Cisco IOS image, but when I tried to calculate the IDLE-PC, the Ctrl+] and the i combination does not work. I've tried all the possible combinations, but it simply does not work (I'm following this tutorial --> http://www.eve-ng.net/documentation/how ... -cisco-ios)
Is there another way to calculate the IDLE PC value?

Regards.

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Calculating IDLE-PC - Key combination does not work

Post by Uldis (UD) » Tue Sep 04, 2018 10:39 am

it does work, just use classic terminals like Putty, and make sure you are using US keyboard..
Uldis

Tiashsam
Posts: 4
Joined: Mon Sep 03, 2018 3:16 pm

Re: Calculating IDLE-PC - Key combination does not work

Post by Tiashsam » Tue Sep 04, 2018 3:06 pm

Hello Uldis.
I was able to make it work by using the Hyper-V terminal and then follow the US layout.
Best regards and thank you for your answer.

dragonfly
Posts: 9
Joined: Tue Oct 16, 2018 7:50 pm

Re: Calculating IDLE-PC - Key combination does not work

Post by dragonfly » Tue Oct 16, 2018 9:50 pm

I'll give that American style keyboard ago.

With the following combination;

CTRL + ] i (3 keys only not plus sign)

All in one go..


If that works, it'll explain why I wasn't getting any joy on that level..

Uldis (UD)
Posts: 5067
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Calculating IDLE-PC - Key combination does not work

Post by Uldis (UD) » Wed Oct 17, 2018 12:11 am

US keyboard:

ctrl +]

then

i

it works, at least on Putty or CRT telnet software

dragonfly
Posts: 9
Joined: Tue Oct 16, 2018 7:50 pm

Re: Calculating IDLE-PC - Key combination does not work

Post by dragonfly » Sat Oct 20, 2018 3:29 pm

ULDIS you da mannnnnnnnn!!!

:D

Thank you

Post Reply