Hello.
Today I've installed Eve-ng. After that I added an Cisco IOS image, but when I tried to calculate the IDLE-PC, the Ctrl+] and the i combination does not work. I've tried all the possible combinations, but it simply does not work (I'm following this tutorial --> http://www.eve-ng.net/documentation/how ... -cisco-ios)
Is there another way to calculate the IDLE PC value?
Regards.
Calculating IDLE-PC - Key combination does not work
Moderator: mike
-
- Posts: 4
- Joined: Mon Sep 03, 2018 3:16 pm
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Calculating IDLE-PC - Key combination does not work
it does work, just use classic terminals like Putty, and make sure you are using US keyboard..
Uldis
Uldis
-
- Posts: 4
- Joined: Mon Sep 03, 2018 3:16 pm
Re: Calculating IDLE-PC - Key combination does not work
Hello Uldis.
I was able to make it work by using the Hyper-V terminal and then follow the US layout.
Best regards and thank you for your answer.
I was able to make it work by using the Hyper-V terminal and then follow the US layout.
Best regards and thank you for your answer.
-
- Posts: 9
- Joined: Tue Oct 16, 2018 7:50 pm
Re: Calculating IDLE-PC - Key combination does not work
I'll give that American style keyboard ago.
With the following combination;
CTRL + ] i (3 keys only not plus sign)
All in one go..
If that works, it'll explain why I wasn't getting any joy on that level..
With the following combination;
CTRL + ] i (3 keys only not plus sign)
All in one go..
If that works, it'll explain why I wasn't getting any joy on that level..
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: Calculating IDLE-PC - Key combination does not work
US keyboard:
ctrl +]
then
i
it works, at least on Putty or CRT telnet software
ctrl +]
then
i
it works, at least on Putty or CRT telnet software
-
- Posts: 9
- Joined: Tue Oct 16, 2018 7:50 pm
Re: Calculating IDLE-PC - Key combination does not work
ULDIS you da mannnnnnnnn!!!
Thank you
Thank you