I will appreciate if someone could provide some guidance or share sample configuration for the lightweight AP registered with vWLC leveraging flex-connect option. In my home lab the outside AP register with vWLC and it also broadcast the SSIDs but wireless clients could not connect to it and neither AP could perform the VLAN switching. I also did mapping of the VLAN in AP but it is not working. Sample layout of the lab is given below.
AP (connected to Physical switch with VLAN configured) -------------------------> (EVE Cloud)------(vSwitch)--------(IOS DHCP)
|
|
|
(vWLC) configured with IP address of the DHCP
Thanks
vWLC flex connect in EVE-NG
Moderator: mike
-
- Posts: 7
- Joined: Tue Feb 06, 2018 6:02 am
Re: vWLC flex connect in EVE-NG
Posting with the right topology
(IOS DHCP)
|
|
(vSwitch)--------------(EVE Cloud)-----------------AP1600 (connected to Physical switch with VLAN configured)
|
|
|
(vWLC) configured with IP address of the DHCP
(IOS DHCP)
|
|
(vSwitch)--------------(EVE Cloud)-----------------AP1600 (connected to Physical switch with VLAN configured)
|
|
|
(vWLC) configured with IP address of the DHCP
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: vWLC flex connect in EVE-NG
Usually AP is connected to the trunk port on the switch. mgmt vlan is used register AP to vWLC, and other subinterfaces will be assigned per SSID.
flex connect works like charm, tested with 1142, 12XX series lightweight APs
flex connect works like charm, tested with 1142, 12XX series lightweight APs
-
- Posts: 1
- Joined: Fri Mar 09, 2018 8:52 am
Re: vWLC flex connect in EVE-NG
AP is connected to the trunk port on the switch. mgmt vlan is used register AP to vWLC,
JSON formatter editor, 192.168.0.1 login
-
- Posts: 409
- Joined: Sun Mar 19, 2017 10:27 pm
-
- Posts: 5086
- Joined: Wed Mar 15, 2017 4:44 pm
- Location: London
- Contact:
Re: vWLC flex connect in EVE-NG
It does and working.
You have to check flexconnect settings.
And need more details about your setup.
Where is eve installed, esxi, vm workst?
how you achieved connection to SW ans AP
UD
You have to check flexconnect settings.
And need more details about your setup.
Where is eve installed, esxi, vm workst?
how you achieved connection to SW ans AP
UD