Cisco ISOv #show output

Moderator: mike

Post Reply
Mikey_Mikey_Mike
Posts: 1
Joined: Thu Apr 09, 2020 9:34 pm

Cisco ISOv #show output

Post by Mikey_Mikey_Mike » Thu Apr 09, 2020 9:41 pm

Hi,
I'm getting to grips with EVE-NG. Really liking the ease of use now I have everything setup.
I found that some show commands don't pull all of the correct output.
For example #show ip route doesn't appear to show the routes learned by OSPF external routes, and locally connected interfaces do not appear in the #show ip int br output.

I find I have to be more specific and use #sh ip route ospf to see the full ospf list of ospf routes.

Is this a limitation on the free EVE version or ISOv?

Thanks for any help

Uldis (UD)
Posts: 4049
Joined: Wed Mar 15, 2017 4:44 pm
Location: London
Contact:

Re: Cisco ISOv #show output

Post by Uldis (UD) » Fri Apr 10, 2020 12:02 am

Probably you talking about vIOS not ISOv?

EVE has no any limitations in this part as well no bugs..
If such something happens then it is node issue not EVE.
Recently did many labs where OSPF was involved. No issues.
I used IOL routers
i86bi_LinuxL2-AdvEnterpriseK9-M_152_May_2018.bin

and I used many times vIOS and no issues with them
same version
vios-adventerprisek9-m.SPA.157-3.M3

Post Reply